Looking Good How To Tell If A Wall Is Load Bearing

The original blueprints for the home will tell you which walls are load bearing and which ones are not.

How to tell if a wall is load bearing. Outside walls are almost always load bearing as are some interior walls although this is where problems tend to arise. Blueprints and building plans are the best and most reliable way to tell if your closet wall is load-bearing or not. If you have your blueprints handy then you have access to the easiest way to tell if a wall is load-bearing.

An example of a non-load bearing partition wall can be seen on the left. This is a load-bearing wall. If the joists were continuous over the top of the wall depending on the loads above and below the wall it could be non load bearing.

The building plans can tell you if a wall contains a support beam and the direction of the floor joists. However if there is an unfinished space like an empty attic without a full floor the wall probably is not bearing a load. What Is a Load Bearing Wall.

If its perpendicular it most likely is a load-bearing wall. Check if the wall is an external or internal wall. If the wall in question is on the first floor and you have access to the crawlspace look to see if there are piers or girders underneath the.

Classed as an active element they provide structural integrity by conducting this weight to the buildings foundations. Be sure to view our other video on How To Eliminate Wobble in a kitchen wall. But there are many a wall such as this in a home that are not bearing any weight whatsoever.

Start at the lowest point of the house. Load bearing walls often have walls above them. HttpsyoutubeKWIHdWjPKC0 Tools we recommend.